As I type, there are about 16 hours remaining in the DeepWars mini-kicker! There are still lots of miniatures to unlock, and you can get the product at a great discount off of retail! The highest pledge level works out to about 40% off before any shipping charges (shipping is free in the USA).
The first stretch goal, the Dark Mariners Deepspawn Reaver Biomech already has some sculpting done, by the talented Bob Olley:
Looks great to me! Here's to hoping we can clinch a few more pledges and unlock a couple more miniatures before this thing finishes.
Tuesday, December 4, 2012
Thursday, November 29, 2012
DeepWars gaming mat finished!
The canvas gaming mat has been finished! It was pretty simple really. To refresh your memory, I started the mat here. After the acrylic had all dried and I was ready to continue, I gave the mat a generalized heavy drybrush of med-dark brown. This made it look more earth-like and less pastel-like. After that, to finish it off with a suitably-spooky ether-lighting effect, I did a light drybrush of some aqua blue. Then I trimmed off the excess bits of canvas.
The finished mat:
A closeup of the texture:
Finally, the only painted mini I have that has any aquatic themes. Suitably out of focus for this picture:
It's Fish-Head from the Mordheim Frenzied mob! I hope you like it! I am eager to get some DeepWars minis in a couple weeks, and to get some suitably aquatic terrain...
Speaking of which, Antimatter games is running another Kickstarter! Their last campaign, to relaunch ShadowSea, fell just short of its goal, unfortunately :( So, the fine folks at Antimatter decided to run another campaign to expand the miniatures range for DeepWars. They started with a lower goal this time, and have well surpassed that, getting funding for many new miniatures! As I type, they are just shy of 13k raised. The coolest thing though, is if they make it to 30k, they will build this terrain:
A wrecked sub! How cool is that, and massive too! Only 5 days left though, so they need some more supporters! Why don't you check it out, and pitch in too! http://www.kickstarter.com/projects/524168246/deepwars-guardians-of-the-abyss-mini-kicker
The finished mat:
A closeup of the texture:
Finally, the only painted mini I have that has any aquatic themes. Suitably out of focus for this picture:
It's Fish-Head from the Mordheim Frenzied mob! I hope you like it! I am eager to get some DeepWars minis in a couple weeks, and to get some suitably aquatic terrain...
Speaking of which, Antimatter games is running another Kickstarter! Their last campaign, to relaunch ShadowSea, fell just short of its goal, unfortunately :( So, the fine folks at Antimatter decided to run another campaign to expand the miniatures range for DeepWars. They started with a lower goal this time, and have well surpassed that, getting funding for many new miniatures! As I type, they are just shy of 13k raised. The coolest thing though, is if they make it to 30k, they will build this terrain:
A wrecked sub! How cool is that, and massive too! Only 5 days left though, so they need some more supporters! Why don't you check it out, and pitch in too! http://www.kickstarter.com/projects/524168246/deepwars-guardians-of-the-abyss-mini-kicker
Wednesday, November 28, 2012
Small Diversion
I recently got distracted from the painting of my Dux Britanniarum. I assure you, I have some Saxons finished, they just aren't photographed yet :)
One of the online forums I frequent, warhammer-empire.com, runs an annual miniature exchange. I participated this year for the third time in a row. For my recipient this year, I decided to paint up not one, but two miniatures to match his army theme of purple and yellow. I decided he needed a nice, stately captain - well suited by an old Empire Reiksguard foot knight captain! To accompany him, none other than a stalwart halfilng would do! It was a great opportunity to paint another lovely White Knight miniature, as well as some classic Empire goodness. Onto some pictures!
The duo:
And some closeups of the Captain:
Finally, some closeups of his tiny compatriot:
I had lots of fun painting these guys, so I hope you enjoy them! They are on their way across the ocean to their new home, here is to hoping they make it there safely.
One of the online forums I frequent, warhammer-empire.com, runs an annual miniature exchange. I participated this year for the third time in a row. For my recipient this year, I decided to paint up not one, but two miniatures to match his army theme of purple and yellow. I decided he needed a nice, stately captain - well suited by an old Empire Reiksguard foot knight captain! To accompany him, none other than a stalwart halfilng would do! It was a great opportunity to paint another lovely White Knight miniature, as well as some classic Empire goodness. Onto some pictures!
The duo:
And some closeups of the Captain:
Finally, some closeups of his tiny compatriot:
I had lots of fun painting these guys, so I hope you enjoy them! They are on their way across the ocean to their new home, here is to hoping they make it there safely.
Friday, November 2, 2012
DeepWars by Antimatter Games
So in addition to my Arthurian project, I have taken on another distraction - DeepWars. I am getting a starter set later this month, and have downloaded the rules from the antimatter website
DeepWars, and its sister game ShadowSea (which, incidentally is on Kickstarter right now: link) are based in an alternate reality of Earth where, in the 17th Century, a fantastic subterran continent is discovered beneath Antarctica, filled with treasures and mystical artifacts. DeepWars takes place underwater in the subterran oceans. The game has a nice mix of fantasy, steampunk, and Cthulu type intrigue. It was their dark mariners that got me interested in the game:
In anticipation of my starter set (I chose the scaly horde), I decided to make a custom gaming mat. I recently saw a tutorial (link) of making one with canvas, sand, paint, and acrylic caulking. I wanted to capture the eerie abyssal feel of the game, so I came up with a few test colours:
For a mat, I used a canvas painting dropcloth from home depot. This one was 4x12 and cut to make a 4x4 mat. It won't quite be 4' long at the end due to the shrinkage, but will be mostly 4x4. Nobody plays on the table edge anyway...
I wanted to do 3 base colours - some purple, deep blue, and green. I got craft paint from Michaels, and bought a bag of playsand from Home Depot, along with their DAP acrylic caulking that contains a bit of silicone. I found the playsand was too fine, so in addition to the playsand, I mixed in some small gravel donated from the side of the road at the end of my driveway. Here is the setup before I got started:
Here are some pictures of the wet board:
Here are some pictures of the board today. It is mostly dry, but there are still some soft spots:
What are those tiny coloured bits? I bought some small craft shells from Michaels and scattered a few to make it more 'bottom of the ocean-ish'. Currently, I would agree with your thoughts that the colours are a tad too bright and garish. My plans from here are to drybrush brown over most of the mat, followed by a light, scattered drybrush of aqua green/blue. I am also considering doing a wash of dark brown to add some shading, but I am unsure as to how well that will work. Washes work well on sand bases, but this is more of a paste, so I think it might end up pooling and looking odd. Any suggestions?
DeepWars, and its sister game ShadowSea (which, incidentally is on Kickstarter right now: link) are based in an alternate reality of Earth where, in the 17th Century, a fantastic subterran continent is discovered beneath Antarctica, filled with treasures and mystical artifacts. DeepWars takes place underwater in the subterran oceans. The game has a nice mix of fantasy, steampunk, and Cthulu type intrigue. It was their dark mariners that got me interested in the game:
In anticipation of my starter set (I chose the scaly horde), I decided to make a custom gaming mat. I recently saw a tutorial (link) of making one with canvas, sand, paint, and acrylic caulking. I wanted to capture the eerie abyssal feel of the game, so I came up with a few test colours:
For a mat, I used a canvas painting dropcloth from home depot. This one was 4x12 and cut to make a 4x4 mat. It won't quite be 4' long at the end due to the shrinkage, but will be mostly 4x4. Nobody plays on the table edge anyway...
I wanted to do 3 base colours - some purple, deep blue, and green. I got craft paint from Michaels, and bought a bag of playsand from Home Depot, along with their DAP acrylic caulking that contains a bit of silicone. I found the playsand was too fine, so in addition to the playsand, I mixed in some small gravel donated from the side of the road at the end of my driveway. Here is the setup before I got started:
Here are some pictures of the wet board:

What are those tiny coloured bits? I bought some small craft shells from Michaels and scattered a few to make it more 'bottom of the ocean-ish'. Currently, I would agree with your thoughts that the colours are a tad too bright and garish. My plans from here are to drybrush brown over most of the mat, followed by a light, scattered drybrush of aqua green/blue. I am also considering doing a wash of dark brown to add some shading, but I am unsure as to how well that will work. Washes work well on sand bases, but this is more of a paste, so I think it might end up pooling and looking odd. Any suggestions?
Wednesday, October 31, 2012
Still here! More Arthurians...
My, how the time flies! Fall is my favourite season, mostly to spend outside. As such, pursuits such as painting tend to be forgotten. If you were wondering what has kept me from the painting table, perhaps this picture of my good friend will give you an idea?
Yep, it's hunting season! But I won't bore you with the exciting details of my outdoor adventures. You came here to see what I have painted. Hopefully I will not disappoint!
I am pleased to say that my Arthurian levy troops are complete! All that is left to paint for the Arthurian force are the 4 archers and the 4 command models.
Here they are, all together:
And per unit:
Next, a closeup of the 3 figures which would act as leaders for each unit (even though there is no in-game representation):
Finally, to show that I have been up to other stuff, here is the whole Arthurian force to date with some 4ground scenery and a stand of trees I recently made:
Hope you like it! I have gotten my Saxon army based (minus the command) so hopefully I can get a few painted up in November.
Yep, it's hunting season! But I won't bore you with the exciting details of my outdoor adventures. You came here to see what I have painted. Hopefully I will not disappoint!
I am pleased to say that my Arthurian levy troops are complete! All that is left to paint for the Arthurian force are the 4 archers and the 4 command models.
Here they are, all together:
And per unit:
Next, a closeup of the 3 figures which would act as leaders for each unit (even though there is no in-game representation):
Finally, to show that I have been up to other stuff, here is the whole Arthurian force to date with some 4ground scenery and a stand of trees I recently made:
Hope you like it! I have gotten my Saxon army based (minus the command) so hopefully I can get a few painted up in November.
Tuesday, September 18, 2012
New Avatar!
So, I decided that I finally needed to make myself an avatar. Using my mediocre skills with my camera, picasa, and gimp, I managed to turn this photo of Dok Dentokk (an orc character whom I think represents me nicely):
Into this:
The picture was resized, of course. Now if I could just figure out how to make interesting text effects in Gimp, I could make it look more interesting. But for now, it fits the bill methinks!
Also, in case you were wondering, The orc is a Gorkamorka Bad Doc which I converted by chopping off his pistol and replacing it with a crude pair of forceps. Open wide!!!
Into this:
The picture was resized, of course. Now if I could just figure out how to make interesting text effects in Gimp, I could make it look more interesting. But for now, it fits the bill methinks!
Also, in case you were wondering, The orc is a Gorkamorka Bad Doc which I converted by chopping off his pistol and replacing it with a crude pair of forceps. Open wide!!!
Sunday, September 16, 2012
More Romano-British!
Well, I thought I would have updated you all more frequently, but distractions are to be expected in real life! Was I very productive? Perhaps not as much. Did I accomplish anything? You bet!
In Dux Britanniarum, your basic starting force for the Romano-British are one unit of 6 elite troops, two units of 6 warriors, and three units of 6 levy/peasant troops. Add to that four ranged troops and four commanders, you get a total of 44 models in your starter army. The Saxon starter army starts with three units of 6 warriors, 2 units of 6 elites, four ranged models and four commanders for a total of 38 models. As of this blog post I have finished:
- 6 elites (my Comanipulares)
- 2 units of 6 warriors (my Milites)
- 10 levy troops (1 2/3 units), minus their spears.
What's that, you want proof? Of course you do.
First up is the second group of Milites, all based and ready to go:
More of the same, but these ones were not a repaint but were started from scratch after stripping the old paintjobs. I took some more photos of the leader and armoured guy. Each will act as a commander for each unit of Milites (no in-game effect, just to stand there and look important!)
Next, I finished the basing and the shields for my Comanipulares:
Lastly, here are the levy so far - all is done save some of the spears:
These figures are primarily West Wind Arthurians. West Wind Productions recently had a 30% off sale, of which I took full advantage. I will write a detailed review of my thoughts about the models, and my experience with the company later. Needless to say, I think they paint up well. When compared to my Gripping Beast Milites, I find the West Wind to have a bit bulkier proportions (particularly legs and feet) but still rank up ok. They have separate heads which provides for more variability (and also more fiddly assembly!)
How about some shots of the army in all its glory? Sure thing!
So my total painted miniatures for this army is 28 (minus 7 spears) out of 44. That leaves me with 16 Romano- British miniatures and 38 Saxons to paint in four weeks before my deadline... not likely gonna happen, but you really can't rush quality, am I right?
In Dux Britanniarum, your basic starting force for the Romano-British are one unit of 6 elite troops, two units of 6 warriors, and three units of 6 levy/peasant troops. Add to that four ranged troops and four commanders, you get a total of 44 models in your starter army. The Saxon starter army starts with three units of 6 warriors, 2 units of 6 elites, four ranged models and four commanders for a total of 38 models. As of this blog post I have finished:
- 6 elites (my Comanipulares)
- 2 units of 6 warriors (my Milites)
- 10 levy troops (1 2/3 units), minus their spears.
What's that, you want proof? Of course you do.
First up is the second group of Milites, all based and ready to go:
More of the same, but these ones were not a repaint but were started from scratch after stripping the old paintjobs. I took some more photos of the leader and armoured guy. Each will act as a commander for each unit of Milites (no in-game effect, just to stand there and look important!)
Next, I finished the basing and the shields for my Comanipulares:
Lastly, here are the levy so far - all is done save some of the spears:
These figures are primarily West Wind Arthurians. West Wind Productions recently had a 30% off sale, of which I took full advantage. I will write a detailed review of my thoughts about the models, and my experience with the company later. Needless to say, I think they paint up well. When compared to my Gripping Beast Milites, I find the West Wind to have a bit bulkier proportions (particularly legs and feet) but still rank up ok. They have separate heads which provides for more variability (and also more fiddly assembly!)
How about some shots of the army in all its glory? Sure thing!
So my total painted miniatures for this army is 28 (minus 7 spears) out of 44. That leaves me with 16 Romano- British miniatures and 38 Saxons to paint in four weeks before my deadline... not likely gonna happen, but you really can't rush quality, am I right?
Subscribe to:
Posts (Atom)









































